Specifications:
SA516GR.70+UNS N04400 CLAD PIPE
Pipe diameter: 632mm
Pipe wall thickness:11mm
Pipe Length:5830mm
Pipe Material:SA516GR.70+UNS N04400
Technique: GTAW Welded.
Grade: SB 127 UNS N04400
Application:
Chemical process equipment, crude oil stills, gasoline and fresh water tanks, marine engineering equipment, valves, pumps and fasteners.
The characteristics of Monel 400/ UNS N0400
Monel 400 has excellent resistance to corrosion by many reducing media such as sulfuric and hydrochloric acids. It is generally more resistant to corrosion by oxidizing media than higher copper alloys. Monel 400 resists pitting and stress corrosion cracking in most fresh and industrial waters. It has good resistance in flowing seawater, but under stagnant conditions, pitting and crevice corrosion is induced. Monel 400 is probably the most resistant to hydrofluoric acid in all concentrations up to the boiling point, of all engineering alloys. Monel 400 is notable for its toughness, it does not show embrittlement tendency at cryogenic temperatures. It is work hardenable.
- Marine engineering
- Chemical and hydrocarbon processing equipment
- Gasoline and freshwater tanks
- Crude petroleum stills
- De-aerating heaters
- Boiler feed water heaters and other heat exchangers
- Valves, pumps, shafts, fittings, and fasteners
- Industrial heat exchangers
- Chlorinated solvents
- Crude oil distillation towers
| C | Mn | S | Si | Ni | Cu | Fe |
| 0.3max | 2.0max | 0.024max | 0.5max | 63.0min | 28-34 | 2.5max |
Clad pipe manufacturing process
The point of manufacturing of clad pipe is using metallurgical ways to create the bond. Clad pipe adopts hot rolled or explosive clad plate to combined with carbon steel plate. (There are also other ways to bonding two kinds steel material, like weld overlay, or co-extrusion.)
After we get the CRA clad steel plates, then we begin the process for manufacturing plate to cladding pipe (An sample type):
Clad Steel Plate Checking – UT for Steel plate – Plate Beveling – Preforming – Forming to Pipe (JCOE) – Welding – Rounding – Hydrastatic test – Beveling pipe end – X Ray Test- Ultrasonic Test – Size Inspection and Measuring – Marking – Packing and Storage
Bimetal Pipe – Nickle Alloy Clad Carbon Steel Pipe
FOB Price: US $9,000-10,000 / PieceMin. Order: 1 Piece
Explosive Welding Nickle Alloy Bimetallic Clad Pipe
FOB Price: US $9,000-10,000 / PieceMin. Order: 1 Piece
Uns N04400 Nickle Alloy Clad Pipe for Pressure Vessel
FOB Price: US $9,000-10,000 / PieceMin. Order: 1 Piece
SA516 Gr. 70+Uns N04400 Clad Pipe
FOB Price: US $9,000-10,000 / PieceMin. Order: 1 Piece
Titanium Nozzle for Corrosive Fluid Transmission Pipeline System
Min. Order: 1 Piece
Gr2 Titanium Welded Piping for Pressure Vessel
Min. Order: 1 Piece
ASTM B338 Titanium Piping for Cooling Tower
Min. Order: 1 Piece
Heat Exchanger Equipment Bimetal Titanium Carbon Steel Clad Tube Sheet
FOB Price: US $80-100 / PieceMin. Order: 1 Piece
316L Stainless Steel Reactor with Half Pipe – Reactor (P012)
Min. Order: 1 Piece
Hot Sale Stainless Steel Reactor
Min. Order: 1 Piece
S32205 Duplex Stainless Steel Reactor – Pressure Vessel (P010)
Min. Order: 1 Piece
You must be logged in to post a comment.