pipe induction 5D bend, 135 degree induction bending pipes
Monday, 07 August 2017
Material: Carbon steel(ASTM A234WPB,,A234WPC,A420WPL6. 20#,Q235,10#,20#,A3, Q235A, 20G,16Mn, ect) Stainless steel(ASTM A403 WP304,304L,316,316L,321. 1Cr18Ni9Ti, 00Cr19Ni10,00Cr17Ni14Mo2, ect) Alloy steel(ASTM A234 WP12,WP11,WP22,WP5,WP9,WP91,16MnR, Cr5Mo, 12Cr1MoV, 10CrMo910,15CrMo, 12Cr2Mo1, ect) Technique: seamless,butt welding Standard:ANSI B16.9, ANSI B16.28, JIS B2311, DIN 2605, 2615, 2616, and 2617,EN10253 Head code: bevel the end Size:1/8” to 48” Radius:30°,45°,60°,90°,180° or as requirement Radius Of Curvature: 1D-10D
- Published in pipe bends
Mechanical lined pipes
Friday, 04 August 2017
Introduction of Mechanical lined pipes Today’s competitive environment compels businesses to seek every possible advantage. Smart companies are looking at all possibilities, including material advantages. New material technologies and manufacturing processes are solving problems that previously have limited product life cycles and created exposure to costly field failures. Sectors including Oil & Gas, Chemical, Power
- Published in Clad Pipe
pipe bend, Carbon Steel Per ASTM A53 Grade B Type E
Friday, 04 August 2017
Bend, Carbon Steel Per ASTM A53 Grade B Type E, Standard Weight, Buttweld End, 90 Degree, Per Pipe Fabrication Institute PFI ES-24, Per ASME B16.25, 3 Diameter Radius, No Tangent each end, Welded, Marked per MSS SP 25 Carbon Steel Pipe Fittings Production Range Grade Specification Carbon Steel: ASTM/ASME A234 WPB / A860 – MSS-SP-75
- Published in Bend, Pipe Fittings
pipe cladding,clad pipe fittings
Friday, 04 August 2017
Pipeline System pipe is international specialists in weld cladding, pipe cladding, clad pipe fitting and fabrication, combining cutting-edge technology with 20 years of world-renowned expertise. Pipeline System offer full supply of weld clad components, pipe and fittings to the oil and gas and offshore industry. PIPE CLADDING – CLAD PIPE AND INDUCTION BENDS 90mm to
- Published in Clad Pipe
Carbon Steel Elbow, 90Deg, A234 WPB, 12 Inch, BW
Friday, 04 August 2017
Pipeline System is a growing manufacturing company in the field of carbon steel flanges, carbon steel fittings and low temperature carbon steel fittings and flanges. Our rich technical experience and organized production procedures has helped us become one of the most trusted supplier of Carbon Steel Elbow, 90Deg, A234 WPB, 12 Inch, BW and flanges
- Published in ELBOW, PIPE FITTINGS
pipe fittings
Friday, 04 August 2017
We specialize in the production of pipe fittings, including large diameter and corrosion resistant (NACE). Our advantage is in part due to our world class production and testing equipment. This in combination with our skilled workforce, rich in manufacturing experience has resulted in significant growth over recent years. Our products range to 3200 mm OD,
- Published in PIPE FITTINGS
ASME B16.49 Carbon Steel pipe 90 degree bends
Thursday, 03 August 2017
Material: Carbon Steel, Alloy Steel, Stainless Steel Standard: ASME B16.9, B16.28, ASTM A234 A420 MSS-75 MSS-79 ,DIN 2605 2609 2616 Size: 1/2inch – 48inch Thickness: sch5s,sch10s,sch20s,sch30,sch40.sch60,sch80,sch100,sch120,sch140,sch160 Advantages of Induction Bending Improves Quality The quality of the surface finish with induction bends is equal to that of cold bending and better than fire bending. As it
- Published in pipe bends
ASTM A105 carbon steel flanges
Wednesday, 21 June 2017
Flange Face Configurations: All Flanges are available in raised face or flat face configurations (except for lap joint flanges) Slip-On Flanges, Blind Flanges,Reducing Flanges Weld Neck Flanges,Lap Joint Flanges,Threaded Flanges Socket Weld Flanges,Orifice Flanges Weld Neck Bore Flanges: Available in all bore sizes Wall Pressure Ratings: 150#, 300#, 600#, 900#, 1500#, 2500# Specialty Flanges: Larger
- Published in FLANGE, PIPE FITTINGS
Bend, longtaidi-Benson
Wednesday, 21 June 2017
MATERIALS AND SIZES Sizes Tolerance OD: 2″ to 60″ -1 ~+2 mm Bend radius: R≧3D WT: 3 to 60 mm WT thinning: R=3D ≤13% R=4D ≤11% R=5D ≤9% R≧6D ≤8% Bend angle: 0~180 deg ±0.5 deg Forming velocity: ±2.5mm per min Forming temperature: ±10°C from the qualification temp. Bend ovality: ≤2.5% Tangent ovality: ≤0.8% ID
- Published in Bend, Pipe Fittings
CLAD,CLAD PIPE,CLAD PIPE FOR SALE
Wednesday, 21 June 2017
Market is increasing the demand for line pipes in corrosion resistant alloys (CRA). Inox Tech takes advantage of a long-lasting experience with production of corrosion resistant alloys along with a deep knowledge of low alloys and carbon steel material to develop clad pipes manufacture. Clad material combines the corrosive and resistance properties of CRA with
- Published in Lined Pipe