API 5L X 60 – Kingdom of Saudi Arabia Customer

Dear sir,

Please find below requirement.

API 5L X 60 SMLS PIPE

14″ X SCH 100 = 212 MTR
18″ X SCH 100 = 196 MTR

ALL ABOVE PIPES SMLS
GRADE A PI 5L X 60

Delivery require in 12 weeks ex china
SAMPLE MTC SHOULD BE WITH OFFER

—
TAALIB NAUSHAD
Overseas Buyer
Kingdom of Saudi Arabia

Line Pipe Grades

:  API 5L B, X42, X46, X52, X56, X60, X65, X70

API 5L X60 Line Pipe Wall Thicknesses

: Light Wall– Extra Heavy,SCH10 through SCH XXS  

API 5L X60 PSL1 Line Pipe Chemical Composition

Chemical Composition of API 5L X60 PSL1
Mass fraction, based upon heat and product analysis a
Seamless Pipe
C	Mn	P		S	V	Nb	Ti
maxb	max.b	min.	max.	max.	max.	max.	max.
0.28e	1.40e	–	0.030	0.030	f	f	f
Welded Pipe
0.26e	1.40e	–	0.030	0.030	f	f	f

 

0.50% maximum for copper, 0.50% maximum fornickel, 0.50% maximum for chromium, and 0.15% maximum for molybdenum.

For each reduction of 0.01% below thespecified maximum concetration for carbon, an increase of 0.05% Unlessotheriwse agreed.

Unless otherwise agreed, the sum ofniobium, vanadium and titanium concentrations shall be = 0.15%

API 5L X60 PSL1 Line Pipe Mechanical Properties

Mechanical Requirements
Y.S	T.S	Elongation
Mpa(psi)	Mpa(psi)
min	min	min
415(60 200)	520(75 400)	f

API 5L X60 PSL2 Line Pipe Chemical Composition

Chemical Composition of API 5L X60 PSL 2
Mass fraction, based upon heat and product analysis % maximum										CARBON EQUIVALENT a
										% MAXIMUM
Cb		Si	Mnb	P	S	V	Nb	Ti	Other	CEIIW	CEPcm
Seamless & Welded Pipes
X60N	0.24f	0.45f	1.4f	0.025	0.015	0.10f	0.05	0.04	g,h	0.43	0.25
X60Q	0.18f	0.45f	1.5f	0.025	0.015	g	g	g	h	0.43	0.25
Welded Pipe
X60M	0.22f	0.45f	1.4f	0.025	0.015	g	g	g	h	0.43	0.25

 

Unless otherwise agreed, the sum of thniobium & vanadum concentrations shall be = 0.06%.

Unless otherwise agreed, 0.50% maximum forcopper, 0.30% maximum for nickel, 0.30% maximum for chromium, & 0.15%maximum for molybdenum.

API 5L X60 PSL2 Line Pipe Mechanical properties

Mechanical Requirements
Y.S	T.S	ELONGATION
Mpa(psi)	Mpa(psi)
min	min	min
415(60 200)	565(81 900)	f

 

 

The specified minimum elongation shall beas determined using the following equation:    

API 5L X60 PSL 1 / 2 Usage      

American Petroleum Institute standard 5L.API pipes & API 5L X60 PSL 1 / 2 are exclusively used for transmission ofgas and petroleum products.       

API 5L X60 PSL 1 / 2 Specification