ASTM A234 WPB DN1400 equal tee,large diameter pipe fittings tee
Wednesday, 16 August 2017
Chinese Seamless Pipe Tee Supplier Landee Offers Seamless Pipe Tee, SS304, 304L, 316, 316L, 312, DN15-DN1200, SCH 10 to SCH 160, XS, XXS, STD.Pipeline System is professional in making ASTM A234 WPB DN1400 equal tee large diameter pipe fittings . Material: ASTM A234 WPB . Size: DN1400 × 1400. Thickess: 9.53 mm. Standard: AWWA C208. Surface
- Published in Butt Weld Tee, Pipe Fittings
DN450 carbon steel pipe fittings 90 degree welding elbow
Wednesday, 16 August 2017
Detailed info about DN450 carbon steel pipe fittings 90 degree welding elbow Material: Carbon steel: ASTM/ASME A234 WPB,WPC Alloy steel: ASTM/ASME A234 WP 1-WP 12-WP 11-WP 22-WP 5-WP 91-WP 911 Stainless steel: ASTM/ASME A403 WP 304-304L-304H-304LN-304N ASTM/ASME A403 WP 316-316L-316H-316LN-316N-316Ti ASTM/ASME A403 WP 321-321H ASTM/ASME A403 WP 347-347H Low-temperature steel: ASTM/ASME A402 WPL 3-WPL 6 High
- Published in Butt Weld Elbows, Pipe Fittings
ANSI/ASME B16.9 90° Long Radius Elbow,Steel Fittings, Butt Weld
Tuesday, 15 August 2017
A 90° elbow long tangent is a long radius (LR) with the centerline curvature equal to 1-1/2 times the nominal pipe size (NPS) and a straight extension at both ends (long tangent) for 2 inch and larger sizes. tangent elbows provide a straight length at the end to accept a Slip-on Flange. The tangent end
- Published in Butt Weld Elbows, Pipe Fittings
pipe cladding-CRA clad pipes and induction bending pipes
Monday, 14 August 2017
Pipeline System is the manufacture of clad pipe and induction bends. clad Pipes made from clad materials meet the highest requirements of durability, corrosion resistance and good value. Their use is recommended in all areas where dynamic stress, high pressure and a high level of corrosiveness can be found in the media transported. By using
- Published in Clad Pipe
DN200-150 Carbon steel Concentric reducer,butt weld reducer,pipe reducer
Friday, 11 August 2017
DN200-150 Carbon steel reducer is a kind of fitting that be used for reducing piping size. There are 2 types reducer as follows: a. Concentric reducer: have a central axis (centerline) of the section between the large and small. b. Eccentric reducer: the central axis has a different (offset) between a large section and small.
- Published in Reducer
ASME B16.9 DN200 Seamless Carbon Steel Equal Tee
Friday, 11 August 2017
Equal tee widely used in petroleum chemical industry, oil, natural gas, liquefied gas, fertilizer, power plant, nuclear power, shipbuilding, paper making, pharmacy, food sanitation, urban construction and other industries the establishment and maintenance of engineering. Request for this kind of pipe pressure is higher in industrial, maximum pressure can reach 600 kg, career pipe pressure
- Published in Butt Weld Tee, Pipe Fittings
CRA clad pipe or lined steel pipes for oil and gas industry
Wednesday, 09 August 2017
Pipeline System offers a variety of CRA clad pipe or lined steel pipes including helical seam clad steel pipe，longitudinal seam clad steel pipe, and seamless or welded lined steel pipe, and produces the corresponding elbows etc.in accordance with API Spec 5LD, DNV-OS-F101, SY/T6623 and CJ/T192. Clad pipes consist of an internal CRA layer which is
- Published in Clad Pipe
pipe induction 5D bend, 135 degree induction bending pipes
Monday, 07 August 2017
Material: Carbon steel(ASTM A234WPB,,A234WPC,A420WPL6. 20#,Q235,10#,20#,A3, Q235A, 20G,16Mn, ect) Stainless steel(ASTM A403 WP304,304L,316,316L,321. 1Cr18Ni9Ti, 00Cr19Ni10,00Cr17Ni14Mo2, ect) Alloy steel(ASTM A234 WP12,WP11,WP22,WP5,WP9,WP91,16MnR, Cr5Mo, 12Cr1MoV, 10CrMo910,15CrMo, 12Cr2Mo1, ect) Technique: seamless,butt welding Standard:ANSI B16.9, ANSI B16.28, JIS B2311, DIN 2605, 2615, 2616, and 2617,EN10253 Head code: bevel the end Size:1/8” to 48” Radius:30°,45°,60°,90°,180° or as requirement Radius Of Curvature: 1D-10D
- Published in pipe bends
Mechanical lined pipes
Friday, 04 August 2017
Introduction of Mechanical lined pipes Today’s competitive environment compels businesses to seek every possible advantage. Smart companies are looking at all possibilities, including material advantages. New material technologies and manufacturing processes are solving problems that previously have limited product life cycles and created exposure to costly field failures. Sectors including Oil & Gas, Chemical, Power
- Published in Clad Pipe
pipe bend, Carbon Steel Per ASTM A53 Grade B Type E
Friday, 04 August 2017
Bend, Carbon Steel Per ASTM A53 Grade B Type E, Standard Weight, Buttweld End, 90 Degree, Per Pipe Fabrication Institute PFI ES-24, Per ASME B16.25, 3 Diameter Radius, No Tangent each end, Welded, Marked per MSS SP 25 Carbon Steel Pipe Fittings Production Range Grade Specification Carbon Steel: ASTM/ASME A234 WPB / A860 – MSS-SP-75
- Published in Bend, Pipe Fittings