TEE PIPA BAJA
Dimensi butt dilas Tees Lurus ASME B16.9 – NPS8 – 48
Dimensi Tee Lurus yang dilas dengan pantat ASME B16.9 – NPS8 – 48
| NPS | O.D.
D |
Pusat untuk End
C |
Pusat untuk End
m |
| 8 | 219.1 | 178 | 178 |
| 10 | 273 | 216 | 216 |
| 12 | 323.8 | 254 | 254 |
| 14 | 355.6 | 279 | 279 |
| 16 | 406.4 | 305 | 305 |
| 18 | 457 | 343 | 343 |
| 20 | 508 | 381 | 381 |
| 22 | 559 | 419 | 419 |
| 24 | 610 | 432 | 432 |
| 26 | 660 | 495 | 495 |
| 28 | 711 | 521 | 521 |
| 30 | 762 | 559 | 559 |
| 32 | 813 | 597 | 597 |
| 34 | 864 | 635 | 635 |
| 36 | 914 | 673 | 673 |
| 38 | 965 | 711 | 711 |
| 40 | 1016 | 749 | 749 |
| 42 | 1067 | 762 | 711 |
| 44 | 1118 | 813 | 762 |
| 46 | 1168 | 851 | 800 |
| 48 | 1219 | 889 | 838 |
| dll. | |||
PIPA FITTING – TEE
Dimensi butt welded Reducing Tees -ASME B16.9- NPS 8- 48
Dimensi Tee Pengurang yang dilas dengan pantat -ASME B16.9- NPS 8- 48
| NPS | O.D.
D |
O.D.
D1 |
Pusat untuk End
C |
Pusat untuk End
m |
| 8 – 31/2 | 219.1 | 101.6 | 178 | 152 |
| 10-4 | 273 | 114.3 | 216 | 184 |
| 12-5 | 323.8 | 141.3 | 254 | 216 |
| 14-6 | 355.6 | 168.3 | 279 | 238 |
| 16-6 | 406.4 | 168.3 | 305 | 264 |
| 18-8 | 457 | 219.1 | 343 | 298 |
| 20-8 | 508 | 219.1 | 381 | 324 |
| 22-10 | 559 | 273 | 419 | 359 |
| 24-10 | 610 | 273 | 432 | 384 |
| 26-12 | 660 | 323.8 | 495 | 422 |
| 28-12 | 711 | 323.8 | 521 | 448 |
| 30-10 | 762 | 273 | 559 | 460 |
| 32 – 14 | 813 | 355.6 | 597 | 508 |
| 34 – 16 | 864 | 406.4 | 635 | 533 |
| 36 – 16 | 914 | 406.4 | 673 | 559 |
| 38 – 18 | 965 | 457 | 711 | 597 |
| 40 – 18 | 1016 | 457 | 749 | 622 |
| 42 – 16 | 1067 | 406.4 | 762 | 635 |
| 44 – 20 | 1118 | 508 | 813 | 686 |
| 46 – 22 | 1168 | 559 | 851 | 724 |
| 48 – 22 | 1219 | 559 | 889 | 737 |
| dll. | ||||
Kamu harus login untuk mengirim komentar.